RED WEAPON 6K - Page 90

COPYRIGHT © 2015 RED.COM, INC
RED DSMC OPERATION GUIDE: WEAPON
955-0116_V6.1, REV-H | 90
SELECT CODEC (REDCODE RAW AND APPLE PRORES)
To set up your file format and codec, follow the instructions below.
1. Go to Menu > Settings > Project > Format.
2. Go to Menu > Settings > Recording > Codec.
3. Select the file format(s) you want to record to from the File Format drop-down menu:
‒ REDCODE RAW
‒ QuickTime
‒ REDCODE RAW + QuickTime
The selected file format displays in the Lower Status Row.
4. REDCODE RAW: Select a target REDCODE compression ratio from the REDCODE menu. For more information,
go to “REDCODE” on page 45.
5. QuickTime: Select a resolution from the Resolution drop-down menu:
‒ 2K: Available on WEAPON 6K (Carbon Fiber) and WEAPON 6K (Magnesium) for all Apple ProRes co-
decs.
‒ 4K: Available when recording to QuickTime only. Available on WEAPON 6K (Carbon Fiber) for the fol-
lowing Apple ProRes codecs:
‒ Apple ProRes 422
‒ Apple ProRes 422 HQ
‒ Apple ProRes 422 LT
6. QuickTime: Select a codec from the Video Codec drop-down menu:
‒ Apple ProRes 4444 XQ
‒ Apple ProRes 4444
‒ Apple ProRes 422 HQ
‒ Apple ProRes 422
‒ Apple ProRes 422 LT