Reer MOSAIC M1 - Interpage in; Interpage out

MODULAR SAFETY INTEGRATED CONTROLLER MOSAIC
250 8540780 • 25/01/2023 • Rev.43
English
INTERPAGE IN / INTERPAGE OUT
First case (1 page scheme)
If the scheme is very complicated and requires a connection between two elements
very far, use the "Interpage" component.
INTERPAGE OUT
INTERPAGE IN
(scheme
side SX)
(scheme
side DX)
The element "Interpage out" must have a name which, invoked by the corresponding
"Interpage in", allows the desired link.
Second case (multipage scheme)
If the scheme is multipage (please refer to section “Create a new project (configure
the MOSAIC system)” and requires a connection between two elements in different
pages, use the "Interpage" component.
The element "Interpage out" must have a name which, invoked by the corresponding
"Interpage in", allows the desired link of another page.
Page 1
Page2
➔
The choice to divide the scheme into pages is not reversible: the scheme created as a multipage
cannot be saved in the previous mode.
INTERPAGE OUT
INTERPAGE IN