Product Identification
Product Identification
Plasma cutting equipment
BARRACUDA RTC 60
BARRACUDA RTC 100
BARRACUDA RTC 150
Rehm GmbH u. Co. KG
Ottostr. 2
73066 Uhingen, Germany
Telephone: +49 (0)7161/3007-0
Fax: +49 (0)7161/3007-20
e-mail: rehm@rehm-online.de
Internet: http://www.rehm-online.de
Doc. no.: 730 1200
Issue date: 06/2013
Rehm GmbH u. Co. KG, Uhingen, Germany 2005
The content of this specification is the sole property of the Rehm GmbH u. Co.
KG company.
Dissemination and/or duplication of this document and use and/or communication
of its content are forbidden except where expressly permitted.
Compensation shall be payable in the event of contraventions. All rights reserved
in the event of registration of a patent, utility model or design.
Manufacture using this documentation is not permitted.
We reserve the right to alter the specification without notice.
To Next Page
Loading...
