REHM BARRACUDA RTC 60 - 1 Introduction; Foreword

Introduction
5
1 Introduction
1.1 Foreword
Dear customer,
You have purchased a REHM plasma cutting machine, a brand-name
German product. We would like to thank you for the confidence you have
placed in our high quality products.
Only components of the highest quality are used in the development and
manufacture of REHM plasma cutting equipment. In order to achieve a
long life-span even in heavy-duty use, only parts which fulfil REHM’s
stringent quality requirements are used for REHM plasma cutting
equipment. BARRACUDA plasma cutting equipment has been developed
and manufactured in accordance with generally recognised safety and
technical regulations. All the relevant legal requirements have been
observed, and the equipment is supplied with a declaration of conformity
as well as the CE symbol.
REHM plasma cutting equipment is produced in Germany and carries the
"Made in Germany" quality mark.
As REHM tries to make immediate use of technical advances, we reserve
the right to adapt and modify the design of this plasma cutting equipment
to conform with the latest technical requirements.