REHM BARRACUDA RTC 60 - Circle Cutting Equipment and Magnet Clamps

Accessories
26
4.3.3 Circle cutting equipment and magnet clamps
Circle cutting equipment, complete, consisting of:
– Carriage (A)
– Threaded bracket (B)
– Centrepoint (C)
– Magnet clamp standard (D)
– Extendable compass bar (250mm and 400mm) (E)
Order number for RTC 60: 776 7010
for RTC 100 / RTC 150: 776 7015
Magnet clamp:
Standard (D) included in circle cutting equipment.
Diameter: 40mm
Maximagnet: article number 776 7017
Diameter: 75mm