Have supply cables and torch hoses
inspected by qualified staff; inspection
noted in the appropriate test book.
Inspection to be carried out more
frequently if required by national
legislation.
Have entire welding equipment
inspected by qualified staff; inspection
noted in the appropriate test book.
Inspection to be carried out more
frequently if required by national
legislation.
8.3 Cleaning of equipment interior
If the REHM plasma cutting equipment is used in a dusty environment, the interior
of the unit must be cleaned regularly by blowing-out or suction.
The frequency with which this cleaning has to be performed depends on the
conditions of use. Use only clean, dry air for blowing-out or use a vacuum
cleaner.
8.4 Proper waste disposal
Only for EU countries!
Do not dispose of electric tools together with household waste material!
In observance of European Directive 2002/96/EC on waste electrical and
electronic equipment and its implementation in accordance with national law,
electric tools that have reached the end of their life time must be collected
separately and returned to an environmentally compatible recycling facility.
To Next Page