57
4. The screen will return to the Mobile Bands Edit dialog with the settings from the recalled
configuration.
5. To apply the configuration, press the “x” in the upper right corner of the dialog. A dialog box will
ask for confirmation of saving changes.
Mode Settings
The mode settings menu can be opened from the top left button on the screen. The settings available in
this menu will change depending on the Mode that the MESA is currently in. The following options are
available in Mobile Bands Mode.
System Menu
This option provides access to system settings such as brightness, software version, image viewer, audio
player, network settings, prefix settings, ITU region, power-down cache, snap-to-peak, and factory reset.
For additional information see page 101.
Normalize Bars
This option resets the dynamic range (min & max powers) of the current bands. The MESA scans the
bands and tries to pick the best initial dynamic range. The dynamic range will eventually expand for any
signal exceeding the max value. This option is also available from the main screen in Mobile Bands
mode. Just press the Normalize Bars icon at the top right of the screen.
To Next Page
Loading...
