Renault MASTER 2024 - Headlight Beam Adjustment

LIGHTING AND SIGNALS
2
164 - Getting to know your vehicle
Headlight beam adjustment
Depending on the vehicle, the switch
A can be used to adjust the height of
the headlight beams according to the
load.
With the dipped beam headlights on,
press or raise switch A as many times
asrequiredtoselecttherequiredposi
tion on the instrument panel.
Load status Control position
Driver only 0
Driver with two
passengers and
luggage com
partment loaded
(1)
1 or 2
Load status Control position
Driver only with
the luggage
compartment
loaded (1)
1, 2 or 3
Thetablebelowgivessomeexam
ples. In all cases, adjust the control
A according to the vehicle load so
that the road can be seen and other
drivers are not dazzled.
(1) Load status reaching maximum
permissible all-up weight.