Renault MASTER 2024 - Cruise Control

CRUISE CONTROL
3
Driving - 263
The cruise control function controls the
engine and braking system to help you
to maintain a driving speed that you
have chosen, known as the cruising
speed. This cruising speed may be set
at any speed above 19 mph (30 km/h).
Controls
1. Changethemode:OFF/speedlim
iter/cruise control.
2. Put the function on standby (and
store the limit speed) (0).
3. Recall the stored cruising speed
(RES).
4. Speed limiter activation and speed
reduction (SET/-).
5. Speedlimiteractivationandin
crease (SET/+).
6. Depending on the vehicle, road sign
detection activation switch [O].
Youcanlinkthecruisecon
troltothe"Roadsigndetec
tion" function 🡺254.
Ifthe"OFF"modeisselect
ed before switching off the
engine, the "Speed limiter"
functionwillbeactivatedbyde
fault the next time the vehicle is
started.
Thisfunctionisanaddi
tional driving aid. The
function does not take
the place of the driver.
Therefore,itcanundernocircum
stancesreplacethedriver'sre
sponsibility to respect speed limits
and to be vigilant (the driver must
always be ready to brake).
Cruise control must not be used
inheavytraffic,onwindingorslip
peryroads(blackice,aquaplan
ing, gravel) and during bad
weather (fog, rain, side winds
etc.).
There is a risk of accidents.