WIPER BLADES: REPLACEMENT
6
Practical advice - 357
Replacing windscreen wiper
blades
2
Access
To access the wiper blades, stand on
the foot panel
1
.
Note: the foot panel may be slippery.
Removal
To replace the wipers, first put them in
the service position
B
.
With the ignition on and the engine
stopped:
– move the stalk
1
twice in succession
to position
A
(single sweep): the wiper
blades will stop in the service position
B
away from the bonnet;
– lift the wiper arm
3
;
– lower the tab
4
and remove the
blade
2
.
Refitting
To refit the wiper blade
2
, insert it into
its housing in the arm
3
,thenclipitun
til you hear a click. Make sure that the
blade is correctly locked in position.