FUSES
6
Practical advice - 359
Fuse box
If any electrical component does not
work, check the condition of the fuses.
Unclip the flap
A
using the groove
B
.
To identify the fuses, refer to the fuse
allocation label located on the back of
flap
A
.
Allocation of fuses (DEPENDING ON
THE EQUIPMENT LEVEL)
Tweezers
1
Disconnectthefuseusingthetweez
ers
1
located at the back of flap
A
.
To remove the fuse from the tweezers,
slide the fuse to the side.
It is not advisable to use the free fuse
locations.
To comply with legislation,
or as a precaution, you can
obtain an emergency kit
containing a set of spare bulbs
andfusesfromanapproveddeal
er.
Your vehicle is equipped with two fuse
boxes in the passenger compartment
and in the engine compartment.
Checkthefuseinques
tion and, if necessary,
replace it (replacement
fuse must have the
same rating as the original.
If a fuse is fitted with too high a
rating, it may cause the electrical
circuit to overheat (risk of fire) in
the event of an item of equipment
using an excessive amount of
current.