Renault MASTER 2024 - Changing a Wheel

TYRES
6
Practical advice - 337
– centre the component 2 inthemid
dle of the wheel;
– lift the retaining cable up as far as it
will go by turning the wheelbrace 4 to
therightandcheckthewheeliscom
pletely secure.
Note: do not place a punctured wheel
withaluminiumwheelrimsintheemer
gency spare wheel winch. Ensure the
winch is refitted correctly.
Place the punctured
wheel flat on the ground.
The valve must be fac
ing the ground.
Risk of losing the wheel.
Do not touch the exhaust
system.
Risk of burns.
Changing a wheel
Unlocking the wheel
If necessary, remove the wheel trim.
Unlocking the wheel
Unlock the wheel bolts using the wheel
brace 1 . Position it so as to be able to
push from above.
Unlocking dual wheels
When removing dual wheels, unscrew
inflating extension piece 3 .
Do not forget to reattach it when re
fitting.
When removing dual wheels, unscrew
inflating extension piece 1 extended
using the hexagonal extension piece 2
(supplied in the tool kit) and pressing
down.
Anti-theft bolt
If you use anti-theft bolts, fit
these nearest the valve
(wheel embellisher may not be
able to fit).