INFORMATION ABOUT THE VEHICLE
7
374 - Technical specifications
Vehicle identification plates
The information shown on the vehi
cle identification plate should be
quoted on all correspondence or or
ders.
The presence and location of the in
formation depends on the vehicle.
Identification plate
A
1.
Manufacturer name.
2.
EC design number or approval
number.
3.
Identification number.
B.
Depending on the vehicle, this
information is also provided on the
marking .
4.
MMAC (Maximum Permissible All-
up Weight).
5.
MTR (Gross Train Weight: vehicle
fully loaded, with trailer).
6.
MMTA (Maximum Permissible
Weight) on front axle.
7.
MMTA on rear axle.
8.
Reserved for related or additional
entries.
9.
Diesel exhaust emissions.
Dependingonthevehicle,thisinfor
mation may not be indicated on the
manufacturer's plate but on the engine
smoke opacity label 🡺192.
10.
Paint reference (colour code).
To access the vehicle type and chassis
number, unclip the cover
C
using a
flat-blade screwdriver or similar tool.
To Next Page
Loading...
