ACCESSING THE ENGINE, LEVELS
5
Maintenance - 311
Bonnet
Opening the bonnet
To open, pull the handle
1
.
Unlocking the bonnet catch
To unlock, push the tab
2
to the left
then open the bonnet.
Before carrying out any
action in the engine
compartment, you must
switch off the ignition
🡺183.
In the event of even a
slight impact involving
theradiatorgrilleorbon
net, have the bonnet
lock checked by an approved
dealer as soon as possible.
Pleasenotewhenwork
ing close to the engine
that it may be hot. The
engine cooling fan may
also start at any moment. The
labelintheenginecom
partment reminds you of this.
Risk of injury.
Closing the bonnet
Ensure that the windscreen wiper
blades are correctly positioned.
Place the stay
4
into its holder
5
, hold
the bonnet in the middle and lower it to
about20cmabovetheclosedposi
tion,thenreleaseit.Itwilllatchauto
matically under its own weight.
Ensure that the bonnet is
properly locked.
Check that nothing is
preventing the catch
from locking (gravel, cloth, etc.).