Renault MASTER 2024 - Active Emergency Braking

ADDITIONAL DRIVING AID FUNCTIONS
3
240 - Driving
Active emergency braking
The system uses information from the
camera 1 , to determine the distance
from your vehicle:
– from the vehicle ahead in the same
lane;
or
– from any oncoming vehicles in the
contextofamanoeuvretochangedi
rection;
or
– fromvehiclespassingperpendicular
ly;
or
– stationary vehicles;
or
– surroundingpedestriansandcy
clists.
The system informs the driver if there
is a risk of head-on collision to enable
appropriate emergency manoeuvres
(pressingthebrakepedaland/orturn
ing the steering wheel).
Dependingonthereactivityofthedri
ver, the system can assist with braking
in order to limit damage or prevent a
collision.
The system is otherwise inactive
and does not trigger an alert.
Thisfunctionisanaddi
tional driving aid.
Thisfunctionisnotun
der any circumstances
intended to replace the due care
and attention of the driver, who
should at all times be in control of
the vehicle.
This system can apply
maximum braking to the
vehicle until it is completely
stationary if necessary.
For safety reasons, always wear
your seat belt when travelling in
your vehicle and make sure that it
is loaded so that no items can be
thrownforwardandhittheoccu
pants.
Location of the camera 1
Makesurethewindscreenisnotob
scured(bydirt,mud,snow,condensa
tion etc.).
Operation
When driving, when there is a risk of
collision, the system:
– braking may be triggered: if the
driver does not react to the alert and
alerts you of a collision risk: the
"Detectedobstacle"messageap
pearsontheinstrumentpanelac
companied by a sound alert.
Note: if the driver presses the brake
pedal and the system still detects a
risk of collision, the braking force
maybeincreasedifitisnotsuffi
cient to prevent the collision.
–