ADDITIONAL DRIVING AID FUNCTIONS
3
246 - Driving
– the system may not respond to small vehicles as effectively as to other vehicles;
– the system may not operate properly when the road surface is slippery (rain, snow, black ice, etc.). ;
– to ensure correct operation, the system needs to distinguish the entire obstacle. So the system cannot detect:
– pedestrians/cyclists in the darkness or in poor lighting conditions;
– partially visible pedestrians/cyclists;
– pedestrians less than approximately 80 cm tall;
– pedestrians carrying large objects;
– ...
In these conditions, the system may not react, may warn the driver or may brake inadvertently.
Deactivating the function
You must disable the function if:
– the area of the camera has been damaged (e.g. on the inside or outside of the windscreen);
– the vehicle is being towed (breakdowns);
– the windscreen is cracked or distorted (do not carry out windscreen repairs in this area; have it changed by an approved
dealer);
– you are not driving on a paved road.
In the event of the system behaving abnormally, deactivate it and contact an authorised dealer.
Halting the function
You can halt the active braking function at any time by tapping the accelerator pedal or by turning the steering wheel in a
collision avoidance manoeuvre.
To Next Page
Loading...
