Renault MASTER 2024 - Page 268

CRUISE CONTROL
3
266 - Driving
Switching off the function
Thecruisecontrolfunctionisinterrupt
ed when you press the switch 1 tode
select the limiter. In this case, the
speed is no longer stored.
The warning light disappears
from the instrument panel to confirm
that the function is no longer active.
Toexitthedrivingassis
tance, press switch 1 as
many times as necessary
until you reach OFF. The "Driving
assist. deactivated" message is
displayedontheinstrumentpan
el.
Inthiscase,thenexttimetheen
gine is started, the "Speed limiter"
function will be activated and
waiting for a speed limit to be
stored.
Putting the speed limiter
on standby or switching
it off does not cause a
rapid reduction in speed:
you must brake by pressing the
brake pedal.