AIR VENTS, HEATING AND AIR CONDITIONING
4
Your comfort - 287
If the air conditioning is not
activated "A/C" warning
light on the button
6
goes
off), prolonged use of recirculated
air may cause mist to form on the
side windows and windscreen as
well as other problems due to the
presence of non-recirculated air in
the passenger compartment. To
avoidthis,airrecirculationisdis
abled automatically after a certain
time.
Adjusting the ventilation fan speed
Move the control
3
to adjust the
amount of air blown. If you want to
shut off the flow of air, set control
3
to
"0" (control
A
) or "OFF" (control
B
).
Thesystemisdeactivated:theventila
tion speed is zero (vehicle stationary).
You can, however, still feel a slight flow
of air when the vehicle is moving.
Setting position us
ing the control
1
willdeacti
vate the recirculation function in
ordertopreventtheriskofcon
densation on the windscreen.
Adjusting the air temperature
Turn control
5
to obtain the desired
temperature. The further towards the
redtheslideis,thehigherthetemper
ature will be.
When the air conditioning system is
used for long periods, it may begin to
feel cold. To increase the temperature,
turn the control
5
to the right.
Rearscreendeicinganddemist
ing
With the engine running, press the
button
2
. The operating tell-tale comes
on.
This function permits rapid demisting
of the rear screen and de-icing of the
rearviewmirrors(onequippedvehi
cles).
To exit this function, press the button
2
again. Warning light goes out.
Demisting automatically stops.
Rapid demisting
Turn controls
1
,
3
and
5
to positions:
– demisting ;
– fan speed to position 3 or 4;
– maximum temperature.
Press the button
4
to deactivate the air
recirculation (indicator light off).
Electric windscreen de-icer
(depending on the vehicle)
With the engine on, press switch
8
(the built-in warning light comes on).
Thisfunctiondeices/demiststhewind
screen (on equipped vehicles).
To exit the function, press switch
8
again.
To Next Page
Loading...
