VEHICLE E-TECH 100% ELECTRIC (EV)
2
Getting to know your vehicle - 31
Charging lead A
This lead is specific to your vehicle
and designed for connecting to wall
sockets or public terminals to enable
standardchargingofthetractionbat
tery.
We recommend that you
use a charging cord that
enables a standard charge
to charge the traction battery.
Beforecleaningthecharg
ing lead, make sure the
lead is disconnected.
Clean the cable using a cloth
slightly dampened with water.
When cleaning, make sure that
theclothdoesnotcomeintocon
tact with the ends of the cable
(connectors, charging pins) to
avoid any risk of corrosion.
Charging lead B
This lead can be used for:
– in normal use, on a socket used only
for the vehicle (14 A/16 A charging);
– occasional charge using a domestic
socket, (8 A charge) when you are not
at home, for example.
In all cases, sockets must be fitted as
stated in the instructions provided with
the charging lead
B
.
In all cases, read the charging lead
B
user instructions carefully.
Never leave the socket
hanging by the cord. Use
the hooks
C
to hang it.
To Next Page
Loading...
