Renault MASTER 2024 - Page 349

BREAKDOWN RECOVERY
6
Practical advice - 347
Only use at the front:
– the towing ring 5 (located in the tool
kit).
These towing points may only be used
for towing: never use them for lifting
the vehicle directly or indirectly.
Access to the towing ring 5 : Move
the driver's seat forward and tilt the
backrest to remove it from the tool kit
🡺334.
Access to the front towing point 6 :
Push the left side of cover 7 to unclip
it.
Screw in the towing ring 5 fully: first
by hand as far as possible, then lock
using the wheelbrace 8 .
Only use the towing ring 5 stored with
the tools 🡺334.
Ensure that the towing
ring is bolted correctly.
Risk of losing the
towed object.
When storing the tools,
ensurethattheyarecor
rectly placed in their
original positions in the
toolboxandstorethetoolboxun
derthedriver’sseat.Donotleave
thetoolsunsecuredinsidetheve
hicle as they may be projected
during braking.
Rear towing point
Use exclusively in the rear:
– the towing ring 1 (located in the tool
kit 🡺334);
– the towing ring 2 if the vehicle is
equipped with a running board.
These towing points may only be used
for pulling the vehicle, never for lifting it
either directly or indirectly.
Access to the towing ring 1 : Move
the driver's seat forward and tilt the
backrest to remove it from the tool kit
🡺334.
Access to the rear towing point 3 :
Unclip the cover 4 inserting a flat-
blade screwdriver or similar into the
groove 4 .