SEAT BELTS
2
72 - Getting to know your vehicle
– the graphic
8
isdisplayedforap
proximately180secondsandthesym
bol for the seat concerned appears in
red.
Alwaysmakesurethatthefrontpas
sengers are properly fastened in and
that the number of seat belts indicated
asfastenedcorrespondstothenum
ber of front seats occupied.
Note: an object placed on one of the
front passenger seats may trigger
warnings in some cases.
Rear seat belt reminder warning
light (depending on the vehicle)
With the doors closed, the graphic
8
is
displayed on the instrument panel for
approximately 60 seconds when the
vehicleignitionisswitchedon.Thisin
forms the driver of the fastening status
of each of the rear seat belts every
time:
– the doors are opened during driving
(vehicle speed above zero);
– arearseatbeltisfastedorunfas
tened.
Understanding the graphic
8
:
– symbol in green:seatbeltfas
tened;
– symbol in red:seatbeltunfas
tened.
Whenthevehiclespeedisbelowap
proximately 12 mph (20 km/h), the
graphic
10
appearsduringapproxi
mately 60 seconds every time one of
therearseatbeltsisfastenedorun
fastened.
When the vehicle speed reaches or
exceeds 12 mph (20 km/h), if one of
the rear seat belts is unfastened during
the journey:
– the warning light flashes on
thecentraldisplay
6
;
and
– abeepsoundsforaround30sec
onds;
and
– the graphic
8
is displayed for at
least 60 seconds and the symbol for
the seat concerned appears in red.
Alwaysmakesurethattherearpas
sengers are properly fastened in and
that the number of seat belts indicated
asfastenedcorrespondstothenum
ber of rear seats occupied.
Adjusting the height of the front
seat belts
Press the button
9
to adjust the seat
belt height, so that the shoulder strap
is worn as shown previously.
Press the button
9
and raise or lower
the seat belt.
Make sure that the seat belt is locked
inpositioncorrectlyafteryouhavead
justed it.