GEAR CONTROL
3
Driving - 191
Operating faults
– during driving, if the "WARNING:
Check Gearbox" message appears on
the instrument panel, this indicates a
fault. Contact an approved dealer as
soon as possible;
– when driving, if the "WARNING:
GearboxOverheating"messageap
pears on the instrument panel, stop as
soon as possible to let the gearbox
cool down and wait for the message to
disappear;
– Troubleshooting on a vehicle with
an automatic gearbox 🡺349.
When setting off, if the lever is locked
in position P even though you are
pressing the brake pedal, the lever can
bereleasedmanually.Todothis,un
clip the base of the lever then place a
tool (rigid shaft) into the slot
3
(located
to the left or right of the lever). Press
simultaneously on the tool (rigid shaft)
and the button
2
to unlock the lever.
Contact your approved Dealer as soon
as possible;