Renault TRAFIC 2024 - Page 221

ADDITIONAL DRIVING AID FUNCTIONS
3
Driving - 219
– the warninglightor,depend
ing on the vehicle, the left-hand and
right-hand line indicators 9 and the
warning light appear in white on
the instrument panel.
The function triggers an alert if the
vehiclecrossesalinewithoutthedi
rectionindicatorshavingbeenactivat
ed.
The function alerts the driver:
– by emitting a beep;
– the warning light flashes in
white or, depending on the vehicle, the
warning light and the indicator 9
onthesideofthebreachedlineap
pear in red on the instrument panel.
Settings
Vehicles fitted with a multimedia
screen.
To access the function settings from
the multimedia screen 3 , refer to the
multimedia instructions:
– "Volume": adjust the volume of the
alert;
– "Alert":adjustthelinedetectionsen
sitivity level. To do this, select:
– "Late": line detected when
breached;
– "Standard": line detected when
approached;
– "Early": line detected when near.
Pleaserefertothemultimediainstruc
tions for more information.
Vehiclesnotfittedwithamultime
dia screen
Withthevehiclestationary,todeacti
vate/activate the alert:
– press the switch 5 as many times as
required to reach the " " tab or,
depending on the vehicle, the " "
tab;
or
press control 5 and repeatedly
press control 6 or 7 to reach the
tab;
–