CRUISE CONTROL
3
Driving - 257
out taking into account the stored
speed:itisthespeedatwhichtheve
hicleismovingthatistakenintoac
count.
Switching off the function
Putting the cruise control
on standby or switching
it off does not cause a
rapid reduction in speed:
you must brake by pressing the
brake pedal.
Thecruisecontrolfunctionisinterrupt
ed:
– when you press the
1
switch. In this
case, the speed is no longer stored;
– when you press the
5
switch. In this
case, the speed limiter is selected and
there is no stored speed.
The warning light and the
"CruisecontrolOFF"messagedisap
pearfromtheinstrumentpaneltocon
firm that the function is deactivated.