2-4
NC4 non-contact tool setting system: NC4 basics
Mounting Mounting achieved via a 3-plate or single plate adjuster pack (sold separately); see
the NC4 non-contact tool setting accessories data sheet (Renishaw part number
H-2000-2223).
Environment IP rating IPX6 and IPX8, BS EN 60529:1992+A2:2013
Storage
temperature
–25 °C to +70 °C (–13 °F to +158 °F)
Operating
temperature
+5 °C to +55 °C (+41 °F to +131 °F)
NC4 specication (continued)
To Next Page
Loading...
Need help?
General
