1-3
www.renishaw.com/nc4
Safety
Information to the user
The NC4 set-up tool (Renishaw part no. A-4114-8000, sold separately) is supplied with non-rechargeable
lithium metal batteries. Refer to the battery manufacturer’s literature for specic battery operating, safety
and disposal guidelines.
• Do not attempt to recharge the batteries.
• Replace the batteries only with the specied type.
• Do not mix new and used batteries in the product.
• Do not mix different types or brands of batteries in the product.
• Ensure that all batteries are inserted with the correct polarity in accordance with the instructions in
this manual and indicated on the product.
• Do not store the batteries in direct sunlight.
• Do not expose the batteries to water.
• Do not expose the batteries to heat or dispose of the batteries in a re.
• Avoid forced discharge of the batteries.
• Do not short circuit the batteries.
• Do not disassemble, apply excessive pressure, pierce, deform or subject the batteries to impact.
• Do not swallow the batteries.
• Keep the batteries out of the reach of children.
• If the batteries are swollen or damaged do not use them in the product and exercise caution when
handling them.
• Dispose of waste batteries in accordance with your local environmental and safety laws.
Ensure that you comply with international and national battery transport regulations when transporting the
batteries or this product with the batteries inserted. Lithium metal batteries are classied as dangerous
goods for transportation and require labelling and packaging in accordance with the dangerous goods
regulations before being offered for transportation. To reduce the risk of shipment delays, should you need
to return this product to Renishaw for any reason, do not return any batteries.
In all applications involving the use of machine tools, eye protection is recommended.
To Next Page
Loading...
Need help?
General
