Renkforce RF100 v2 - Info Screen Display

18
Menu option Function
< Fan speed >
Adjustfanspeedbetweentherangeof0to255RPM.Defaultsettingis255RPM.
Whennozzletemperaturereaches40°C,thefanwillbeautomaticallyswitchedONat
defaultsetting255RPM.
< Flow >
Adjust extruder lament feeding speed between the range of 10 to 300 %. Default
settingis100%.
Feedingspeeddependsonprintspeed.
Iftheowrateistoohigh,thenozzlemaybeclogged.
c) < Info screen >
1 %ofprintingprocess
2 Workingtimecountingfromprinttaskstart
3 3D printer status information
4 Print speed (can be adjusted by control knob)
5 CurrentpositionX-,Y-,Z-axis
6 Currenttemperature/targettemperature
6
50
2
5
4
3
1
6
Theinfoscreeninformsyouaboutdifferentstatuses:
Status information Situation
“3D printer ready ...“ 3D printer is ready to use.
“Heating“ Heatingisinprocess.
“Heatingdone“ Heatingprocessisnished.
“Printing..“ Printingisinprocess.
“Printingaborted“ Printinghasbeenterminated.
“Restartprinter“ Malfunctionofthe3Dprinter.
“6hours5minutes“
Totalprintingtime,forexampleherethemodelleneedsintotal6hoursand5minutes
to be printed.
"Temp sensor error" Malfunctionofthethermistor(pleasereferto„18.Troubleshooting“onpage44).