Renkforce RF100 v2 - Technical Specifications

47
20. Technical data
Operatingvoltage .................................100-240V/AC,50/60Hz
Power consumption ..............................max. 60 W
Powerconsumptionduringstandby .....1.08 W
Fuse. .....................................................F5AL,250V
Production process ............................... Fusedlamentfabrication(FFF)
Modelsize(WxHxD) ......................... max. 120 x 120 x 120 mm
Printinglayerresolution ........................0.1-0.2mm
Print speed ...........................................30-300mm/s
Print format ............................................GCODE
Nozzle (ø) .............................................0.4 mm
Filament (ø) ..........................................1.75 mm
Suitablelamentmaterial .....................PLA, Flexible, Wood, Pearl, Elastic, Copper, Aluminium
Extrudingtemperature. .........................+180to+260°C
(whennozzletemperaturerangesbetween230to260°C,operationtime
must not exceed 10 mins per cycle)
Interfaces .............................................. USB 2.0 and SD card reader
Systemrequirements ............................Windows
®
XPorlater,MacOS10.6.8orlater
Compatiblewith“Cura“software ..........Version15.04.6orlower
Operatingconditions .............................+5to+55°C,30–90%relativehumidity(non-condensing)
Storageconditions ................................ +5to+35°C,30–90%relativehumidity(non-condensing)
Dimensions(WxHxD) .......................295 x 331 x 351 mm
Weight ..................................................9.5kg