Renkforce RF100 v2 - Loading 3 D Model Files

39
h) Load model le – Windows
®
and Mac OS
• Inthemainfolder“3DModels”ontheenclosedSDcard,youwillndafewexamplesfortherstprintingattempts.
However,therearealreadymanyplacesonlinewhereyoucandownload3Dmodelles.Alternatively,youcanalso
usea3Dprogrammetomakeyourown.Ensurethatthe3Dmodelleisin.stlformat(STL-le).
• Loadthemodellebydraggingitontothevirtualbuildbedinthemainwindoworbyclickingthe
button.The
lewillbeconvertedautomaticallyto.gcodeformat.
WhentheSDcardisnotinsertedinthecomputer,clickthe buttontosavetheGCODEleonthecomputer.
• Foroff-lineprinting,savetheGCODEleontotheSDcard.TheninserttheSDcardintotheprinteranddirectlystart
printingfromtheprinter’scontrolpanel.
• WhentheSDcardisconnectedtothecomputer,thebuttonturnsinto
enablingyoutosavetheleontothe
SD card.