Renkforce RF100 v2 - Loading Filament into Extruder

23
c) Load lament
Unload filament
Move axis
Disable steppers
Temperature
1
2
Move X
Move Y
Move Z
Move axis
3
• In < Prepare > menu, select
rst < Auto Home >, then
< Move axis >.
• Select < Move 1mm > . • Select<MoveZ>.
z: +020.0
4
5
Auto home
Level Bed
Preheat PLA
Main
6
• Adjust the Z-axis to minimum
+20.0mm.
• Insertthelamentintotheholeof
theextruder.
• Select<PreheatPLA>underthe
< Prepare > menu.
Auto home
Level Bed
Preheat PLA
Load filament
7
8
• Whenthecurrenttemperaturehas
reached the target temperature
(at least 170 °C), select
<Loadlament>.
• Gently push and guide the
lamentintoextruderuntilitexits
fromthenozzle.
• Feel the lament slowly getting
drawnintotheextruder.
Ifnolamentexitsfromthenozzleafterlamentmovementstopped,select<Loadlament>again.After
lamentisloaded,lamentresiduecanberemovedwiththetweezers.