EasyManua.ls Logo

Renkforce RF100 v2 - Intended Use; Delivery Content

Renkforce RF100 v2
48 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
5
3. Intended use
The3Dprintercomespre-assembledandisreadytouse.ItcanbeoperatedviaPCusingtheincludedsoftwareor
viatheintegrateddisplay.Thepowder-coatedmetalhousingensuresalongservicelife.Theproductprintsobjectsup
toasizeof120x120x120mmandisequippedwithabrightLEDlightthatallowsyoutomonitortheprogressofthe
print.Thereareover100ready-to-print3DmodelsontheSDcard,whichcanbeprintedoutbyfewclicks.
The3Dprinterisonlyapprovedforconnectiontoa100-240V/AC,50/60Hzmainssocket.Itisdesignedonlyfor
homeuse.
Itisintendedforindooruseonly.Contactwithmoisture,e.g.inbathrooms,mustbeavoidedunderallcircumstances.
Forsafetyandapprovalpurposes,youmustnotrebuildand/ormodifythisproduct.Ifyouusetheproductforpurposes
otherthanthosedescribedabove,theproductmaybedamaged.Inaddition,improperusecanresultinshortcircuits,
res,electric shocksor otherhazards. Readthe instructionscarefully andstore themin asafe place.Make this
productavailabletothirdpartiesonlytogetherwithitsoperatinginstructions.
Allcompanynamesandproductnamesaretrademarksoftheirrespectiveowners.Allrightsreserved.
Up-to-date Operating Instructions, 3D model les, conguration les:
Download the latest operating instructions, 3D model les and conguration les at
www.conrad.com/downloads or scan the QR code shown. Follow the instructions on the
website.
4. Delivery content
• 3Dprinterfully-assembled
• 250gGenuineRenkforcelament
(1,75mm,white)
• 8GBSDcardwith
- Manual
- “Cura“ Software
- USB driver
- Over100ready-to-print3Dmodels
- Congurationles
• Power cable
• Quick-Start-Guide
• Filamentspoolholder
• Filament tube
• USB cable
• Scraper
• Tweezers
• Side cutter
• 2.0mmhexkey
• 2.5mmhexkey
• 2x Screw
• Glassbuildbedpre-installedwithadhesive
surface
• 5xGenuineRenkforcelamentsamples(wood,
copper,elastic,glowindarkandthermocolor-
1.75mm-50geach)

Table of Contents