Renkforce RF100 v2 - Introduction; Explanation of Symbols

4
1. Introduction
Dear customer,
Thankyouforpurchasingthisproduct.
ThisproductcomplieswiththestatutorynationalandEuropeanrequirements.
Tomaintainthisstatusandtoensuresafeoperation,youastheusermustobservetheseoperatinginstructions!
 Theseoperatinginstructionsarepartofthisproduct.Theycontainimportantnotesoncommissioningand
handling.Alsoconsiderthisifyoupassontheproducttoanythirdparty.Therefore,retaintheseoperating
instructionsforreference!
Ifthereareanytechnicalquestions,pleasecontact:
International: www.conrad.com/contact
UnitedKingdom: www.conrad-electronic.co.uk/contact
2. Explanation of symbols
 Thelightningsymbolinsideatriangleisawarningtoinformyouofpotentialrisksofpersonalinjury,such
aselectricshock.
 Thesymbolwiththeexclamationmarkinthetriangleisusedtoindicateimportantinformationinthese
operatinginstructions.Alwaysreadthisinformationcarefully.
 Thissymbolwarnsofhotsurfacesthecontactwithwhichmaycauseinjury.
 Thissymbolwarnsofhandinjurythatmayoccurwhenreachingintothedeviceinoperation.
 Thissymbolwarnsofhandinjurythatmayoccurbybeltdrive.
 Onlydesignedforindooruse.
 Readtheoperatinginstructionscarefully!
 Thearrowsymbolindicatesspecialinformationandadviceonoperation.