Renkforce RF100 v2 - Loading Windows Config Files; Loading Mac OS Config Files

38
f) Load conguration le – Windows
®
• In orderto ease theprocess of setting parametersfor differentmaterials (Wood/Elastic/Copper/PLA),you can
loadpre-conguredmaterialcongurationlesfromtheSDcard.Suchcongurationlesarealsoavailablefrom
www.conrad.com.
1 Click “File”
2 Select“OpenProle...“.
1
2
3 Selectalamentcongurationleforthelamentusedbyyouintheselectionwindowandconrmyourselection.
ThereareseveralcongurationlesontheenclosedSDcardinthemainfolder“Cong”.Alternatively,skip
thisstepandfollowthesettingsinlastsection(fordetailsrefertochapter“e)Softwaresettings-Windows
®
”
onpage35)forstartingtherstprint.
g) Load conguration le – Mac OS
• CongurationlesforMacOSarenotincludedintheenclosedSDcard.
• Downloadcongurationlesatwww.conrad.com/downloads.
• Copythemtoyourcomputer.
• Loadthecongurationlesbyrepeatingstepsasdescribedinthechapter“d)SetupoftheSoftware-MacOS”on
page32.
Ensuretodownloadcongurationlesstartingwith“RF100v2-XXX“.AsthoselesaresuitableforMac
OS.Filesstartingwith“Cong-xxx“aresuitableforWindows
®
.