Renkforce RF100 v2 - SD Card Manual; SD Card Software and Drivers; Features and Functions

7
c) Manual
• Thefolder“Manual“containstheQuick-Start-Guide.
Thecontentofthisfoldercannotbereviewedonthecontrolpanel.
d) Software
• Thefolder“Software“containsthe“Cura”softwareinformofanexecutable(.exe)forWindows
®
andadiskimage
(.dmg)forMacOS,aswellastheUSBdriver.
Thecontentofthisfoldercannotbereviewedonthecontrolpanel.
6. Features and functions
• 3D printer completely assembled and ready to use
• Max.printedobjectsize:120x120x120mm
• Highlypreciseextruderwith 0.4mmprintingnozzle
• LCdisplaywithcontrolknobfordeviceoperationrightatthedevice
• Operationviacomputer(USB)orstand-aloneoperationwithSDcard
• SupportprintingfromSDcardandPC
• Manualadjustmentoftheprintingparameterspossibleevenduringoperation
• Extremely stable due to metal construction
• Suitablefor1.75mmlamentsofthetypePLA,wood,copper,elastic,glowindarkandthermocolor
• Over100ready-to-print3Dmodels
• “Cura“ software included