Name: Reolink C1
Brand: Reolink
Rating: 4 (1 reviews)

To Next Page

To Previous Page

Point Name, then click the button.

 Cruise Path

1. Choose Cruise Path 0 and go to to enter the Cruise Setup page.

2. Choose Cruise Point 1 and go to Cruise Point Setup.

3. Choose the Preset you have set, input Cruise Time (how long it will stay when

the camera moves to a preset point, unit: second) and Cruising Speed.

4. Configure other Cruise Point according to your need.

5. Click OK to save and then click to run the preset point. Click to stop

cruise.

Questions and Answers:

Need help?

Do you have a question about the Reolink C1 and is the answer not in the manual?

Reolink C1 Specifications

General

Frame Rate	20fps
Image Sensor	1/2.7" CMOS
Wireless Standard	IEEE 802.11b/g/n
Operating Frequency	2.4GHz
Wireless Security	WPA/WPA2
Protocols	HTTPS, SSL, TCP/IP, UDP, HTTP, IPv4, UPnP, RTSP, RTMP, SMTP, NTP, DHCP, DNS, DDNS, FTP, P2P
Storage	Micro SD card (up to 128GB)
Operating Temperature	-10° C~+55° C (14° F~131° F)