Name: Reolink C1
Brand: Reolink
Rating: 4 (1 reviews)

To Next Page

To Previous Page

4.4 Device Settings > Alarm

The camera will detect motion when there is a change in the picture. Check the Enable

box to enable motion detection. you can set up the sensitivity, schedule, motion area on

this page.

NOTE: Don’t use PTZ system and motion detection simultaneously.

4.4.1 Motion > Sensitivity

It means how sensitive the camera will be to the change of the environment. Drag the slider

to change the sensitivity value. The lower the number is, the more sensitive the motion

detection will be, and the more frequent motion will be triggered.

Click the Setup button to enter the Sensitivity setup page.

Questions and Answers:

Need help?

Do you have a question about the Reolink C1 and is the answer not in the manual?

Reolink C1 Specifications

General

Frame Rate	20fps
Image Sensor	1/2.7" CMOS
Wireless Standard	IEEE 802.11b/g/n
Operating Frequency	2.4GHz
Wireless Security	WPA/WPA2
Protocols	HTTPS, SSL, TCP/IP, UDP, HTTP, IPv4, UPnP, RTSP, RTMP, SMTP, NTP, DHCP, DNS, DDNS, FTP, P2P
Storage	Micro SD card (up to 128GB)
Operating Temperature	-10° C~+55° C (14° F~131° F)