9
Auto Focus: hold the button to focus backward and to
focus forward.
3.1.3 Pan/tilt and Preset
Pan/tilt buttons
Click the directional arrows on the pan/tilt wheel to manually control the directions
of the camera.
Click the button in the middle to start automatic scan, click it again to stop
it at the direction you prefer.
Set Preset
: Set preset, click this button to set a preset.
: Delete preset. Click the button to delete the preset position if you do
not want it, Enable status will go back to Unset.
: Call. Click this button, the camera will turn to the preset position you have
choose.
How to set preset:
1. Click the directional arrows on the pan/tilt wheel to turn the camera lens.
2. when it points to the position you prefer, choose Preset 1(highlighted in yellow
color), then click the button to record the preset position, Enable status will
become Set.
3. When you need to set another preset, repeat the above steps, and choose Preset
2.
4. If you want the camera to turn to the preset you already set, choose the Preset
To Next Page
Loading...
Need help?
General
