Reolink C1 User Manual

17
 State: It shows the current status of the camera, whether it is login success or login
failed.
 Refresh: Click this button to refresh the camera which will make another attempt to
login. This icon is available only when camera status is login failed.
 Edit: Click to edit the login information of the camera.
 Delete: Delete the camera from Camera List.
Device Settings
Click the button to enter Device Settings page.
4.1 Device Settings > Display
Click OSD under Display, users can modify the display info of the camera on this page.

Reolink C1 Specifications

General

Frame Rate	20fps
Image Sensor	1/2.7" CMOS
Wireless Standard	IEEE 802.11b/g/n
Operating Frequency	2.4GHz
Wireless Security	WPA/WPA2
Protocols	HTTPS, SSL, TCP/IP, UDP, HTTP, IPv4, UPnP, RTSP, RTMP, SMTP, NTP, DHCP, DNS, DDNS, FTP, P2P
Storage	Micro SD card (up to 128GB)
Operating Temperature	-10° C~+55° C (14° F~131° F)