Name: Reolink C1
Brand: Reolink
Rating: 4 (1 reviews)

To Next Page

To Previous Page

How to change the login password:

1. High the user account whose password you want to change, go to Modify Password.

2. Check Enable Login Password, enter the old password, input the new one and re-

type it to confirm, then go to OK, it will show “Operation Succeed” on the bottom which

means the password changed successfully.

Note: If the old password is the default one, please leave the Old Password field blank.

Chapter 5 Basic Settings

Click Basic Settings to display the sub menus including OSD, Encode and Image.

5.1 Basic Settings > OSD

Please refer to 4.1 Device Settings > Display.

5.2 Basic Settings > Encode

Questions and Answers:

Need help?

Do you have a question about the Reolink C1 and is the answer not in the manual?

Reolink C1 Specifications

General

Frame Rate	20fps
Image Sensor	1/2.7" CMOS
Wireless Standard	IEEE 802.11b/g/n
Operating Frequency	2.4GHz
Wireless Security	WPA/WPA2
Protocols	HTTPS, SSL, TCP/IP, UDP, HTTP, IPv4, UPnP, RTSP, RTMP, SMTP, NTP, DHCP, DNS, DDNS, FTP, P2P
Storage	Micro SD card (up to 128GB)
Operating Temperature	-10° C~+55° C (14° F~131° F)