Reolink C1 User Manual

13
 Stream Type: choose the stream type for the recorded file, it includes Clear, Balanced
and Fluent.
 Post-record: set the time of post-record when recording triggered by motion detect.
Click Save to save and enable the settings.
3.2.3 Local Settings > Transcode
On this page, users can transcode the H.264 file to AVI file.
How to transcode the video file:
1. Click Browse to select the save path for the transcoded file.
2. Click Add to add the file which you want to transcode to AVI format.
3. Choose the file, then click Transcode, it will show Start or Finish under Status.
Remove: remove the selected file from the box.
Clear: remove all the files in the box, no matter it is selected or not.
3.3 Playback
Under this menu, you can playback the recorded video both on your computer and the
built-in SD card.
3.3.1 Local Playback
Click the Playback button and go to Local playback. On this page, you can play the
recorded video saved on your computer.

Reolink C1 Specifications

General

Frame Rate	20fps
Image Sensor	1/2.7" CMOS
Wireless Standard	IEEE 802.11b/g/n
Operating Frequency	2.4GHz
Wireless Security	WPA/WPA2
Protocols	HTTPS, SSL, TCP/IP, UDP, HTTP, IPv4, UPnP, RTSP, RTMP, SMTP, NTP, DHCP, DNS, DDNS, FTP, P2P
Storage	Micro SD card (up to 128GB)
Operating Temperature	-10° C~+55° C (14° F~131° F)