Reolink C1 User Manual

We have developed user-friendly products and
documentation. You may download the software and
manual from https://reolink.com/software-and-
manual/.
If you have any questions, you may refer to
https://reolink.com/faqs/.
If you may need any technical support, please contact
us at support@reolink.com.
You may download the Firmware from
https://reolink.com/firmware/.

Reolink C1 Specifications

General

Frame Rate	20fps
Image Sensor	1/2.7" CMOS
Wireless Standard	IEEE 802.11b/g/n
Operating Frequency	2.4GHz
Wireless Security	WPA/WPA2
Protocols	HTTPS, SSL, TCP/IP, UDP, HTTP, IPv4, UPnP, RTSP, RTMP, SMTP, NTP, DHCP, DNS, DDNS, FTP, P2P
Storage	Micro SD card (up to 128GB)
Operating Temperature	-10° C~+55° C (14° F~131° F)

Summary

Chapter 1 General Introduction of the camera

1.1 Product Feature

Details camera specifications including sensor, resolution, lens, angle of view, IR distance, dimensions, weight, power input, and interface.

Chapter 2 Install Reolink Client software

2.1 Connection Diagram

Illustrates the connection steps between the camera, router, and computer for initial setup.

2.2 Requirement for computer

Lists the necessary hardware and operating system requirements for installing the Reolink client software.

2.3 Installing process

Provides a step-by-step guide for installing the Reolink client software on a computer, including wizard steps.

Chapter 3 Overview of client software

3.1 Live View

Chapter 4 Camera Configuration

4.2 Device Settings > Recording

Covers parameters for recording, including stream type, resolution, frame rate, bitrate, and recording options for the SD card.

4.3 Device Settings > Network

4.4 Device Settings > Alarm

Chapter 5 Basic Settings