RF-Star nRF52832 - Page 21

nRF52832
www.szrfstar.com V1.3 - Sep., 2020
Shenzhen RF-star Technology Co., Ltd. Page 20 of 58
AT+STATUS
Query / set whether to display device status.
Take effect immediately, do not save after
power off.
AT+ADS
Query / set broadcast parameters under slave
mode.
Take effect after restart, save after power off.
AT+CON_INTERVAL
Query / set connection interval.
Take effect after restart, save after power off.
AT+SERVICE
Query / set BLE service parameters.
Take effect after restart, save after power off.
AT+SCAN
Scan device
Only effective in master mode and master-
slave mode.
AT+CONNECT
Connect devices.
Only effective in master mode and master-
slave mode.
AT+DISCONNECT
Disconnect the connected device.
Take effect immediately, do not save after
power off.
AT+AUTO_CNT
Automatically reconnect slave devices.
Only effective in master mode and master-
slave mode.
Take effect immediately, save after power
off.
AT+TTM_ROLE
Define the default transparent transmission
role.
Only effective in master-slave mode.
Take effect immediately, do not save after
power off.
AT+CNT_LIST
Query the connected slave device list of the
current device. And query the handle of the
connected slave device.
Only effective in master mode and master-
slave mode.
AT+TTM_HANDLE
Transparent transmission handle during
specified multi-connection.
Only effective in master mode and master-
slave mode.
Take effect immediately, do not save after
power off.
AT+DEV_DEL
Delete the saved slave devices.
Take effect after restart, save after power off.
AT+OBSERVER
Enable / disable observer mode.
Only effective in master mode and master-
slave mode.
AT+BEACON
Query / set Beacon parameters.
Take effect after restart, save after power off.
AT+ROLE
Query / set device role.
Take effect after restart, save after power off.
AT+POWER
Query / set device power.
Take effect after restart, save after power off.
AT+SLEEP
Query / set sleep status (Only effective for one
time).
Take effect immediately, do not save after
power off.