6. System Setup and Operation
How to Set up the Volume
VSP 516S User Manual 104
How to Set up the Volume
In single image mode, the operations are as follows:
1. Push [MENU/EFFECT] to enter the menu items, turn the knob, choose
[AUDIO], push the knob to confirm, turn the knob, and choose [MUTE].
2. Turn the knob, and choose ―OFF‖, disable the mute function.
3.Turn the knob, choose <VOLUME>, turn the knob to adjust the volume.
For example, turn the volume down to 20:
In PIP mode, first, choose IMAGE A or IMAGE B as audio input source,
specific steps are as follows:
MENU AUDIO AUDIO IN IMAGE A/IMAGE B, or push the
[IMAGE1/IMAGE2] button, choose IMAGE A or IMAGE B, then repeat the
step1 to 3 above.
To Next Page
Loading...
Need help?
General
