2. Hardware Orientation
VSP 516S Back Panel
VSP 516S User Manual 31
Used to connect the windows control program or device upgrade.
5: RS232 Interface
Used to connect the windows control program or device upgrade.
INPUT Interface
It includes 1 3G-SDI input (SDI module), 3 CVBS inputs by BNC interfaces,
1 S-video, 1 DVI-I input (compatible with HDMI), 1 VGA input by DB15
interface, 1 Displayport and 3 YPbPr inputs.
1: 3G-SDI Input
SDI input, input video signal from HD camera and radio processing
equipment, connect SDI interface via 75 ohms impedance BNC port.
17: Displayport Input
Displayport input, Input the video signal from HD player, computer.
18~20: CVBS Input
CVBS input, input standard video signal from players, cameras etc.,
supported resolution 480i and 576i via BNC. Supported standards include:
PAL, NTSC and SECAM.
21: S-Video Input
S-Video input, used to input S-Video signal (PAL, NTSC, SECAM
compatible).
22: DVI Input
DVI input, input the video signal from computer, DVI signal generator. If the
EDID is HDMI, the DVI Can be compatible with HDMI 1.3.
(This connection can not support hot-plugging)
23~25: YPbPr Input
R/Pr G/Y B/Pb BNC, support SD/HD analog video input, up to 1080p60.
To Next Page
Loading...
Need help?
General
