5. Communication Software Guideline
Software Operation
VSP 516S User Manual 62
Software Operation
Install communication which comes with the package of VSP 516S device.
Double click icon from home screen to run the
software.
Double click icon, choose and click to run the software.
VSP 516S communication software interface as shown:
Connection
When control video processor through PC software, besides the power
cord, the product default equip with a line that is COM (RS-232), 9-pin
(DB9F), RJ11 COM crystal head (6 B4C). Below are the details about
connection of steps:
First connect 9-pin (DB9F) to the computer on the corresponding port, and
connect COM crystal to RS232 port on video processor. Open video
processor; Next, operate the computer, back to computer desktop, right
click [My computer] to [Properties], find the [Hardware] option card, as
follows, left click [Device manager]:
To Next Page
Loading...
Need help?
General
