VSP 516S User Manual 124
2. Communication Firmware Upgrade
Upgrade by copy the file, the form of the file is: .MCU, and upgrade steps are as follows:
(1) Connect the USB interface of VSP516S to the computer with a USB cable.
(2) Plug in the power cord, and make sure the device is in normal operation.
(3) Push MENU button, and enter [USB UPDATE] option, operation steps are:
MENUSYSTEMUSB UPDATESEL.
(4) Open the USB drive that plug into the computer, and delete the "firmware. bin" file in
the USB drive, then copy the MCU file of VSP516S to the USB drive, program
loading is complete after the file has been copied.
(5) Reboot the device, and enter the menu to check if the version is right, factory reset is
completed.
Operation steps are: MENUSYSTEMSYSTEM INFOMCU.VER.
3. CORE Panel Upgrade
Method 1: Upgrade by copy the file, the name of the file is: VIDEO.fvb, and upgrade steps
are as follows:
To Next Page
Loading...
Need help?
General
