19
After the electrodes no longer stick to the treatment site completely,
dispose of electrodes and start with new electrodes. Replacement
electrodes should be re-ordered through or on the advice of your
physician to ensure proper quality.
CAUTION:
1. Before applying the self-adhesive electrodes, it is recommended
to wash and degrease the skin, and then dry it.
2. DO NOT turn on the device when the electrodes are not
positioned on the body.
3. NEVER remove the self-adhesive electrodes from the skin while the
device is still turns on.
4. It is recommended that, at minimum, 2”x2” self-adhering based,
square electrodes are used at the treatment area.
5.1.3 Electrode Instructions
Connecting Lead Wires
Insert the lead with the Red (+) electrode
connector into one adhesive Electrode. Insert the
lead with the Black (-) electrode connector into
the other electrode. Make certain the lead wires
are seated completely into the electrodes, there
are no bare metal of the pins exposed.
Securing Electrodes
Remove the adhesive Electrodes from the
protective backing and apply to the treatment
area as prescribed. Ensure that the entire elec
-
trode surface is in contact with patient skin by
pressing into place.
To Next Page
Loading...
