User Tools (System Settings)
40
3
❖
❖❖
❖ Panel Tone
You can specify whether or not the machine should emit a tone when the keys
on the control panel are pressed.
• On
• Off
Note
❒ Default: On
❖
❖❖
❖ Warm Up Notice
You can have the beeper sound when the machine becomes ready to copy af-
ter leaving Energy Saver mode or when the power is turned on.
• On
• Off
Note
❒ Default: On
❒ If the Panel Tone setting is [Off], the beeper does not sound, regardless of
the Warm Up Notice setting.
❖
❖❖
❖ Copy Count Displ.
You can specify the copy count display format.
If you press [Up], the display counts upward, if you press [Down], the display
counts downward.
• Up
• Down
Note
❒ Default: Up
❖
❖❖
❖ Feed Start Method
You can specify whether feeding starts automatically or after pressing the
{
{{
{Start}
}}
} key.
• Auto
• Press Start Key
Note
❒ Default: Auto
❖
❖❖
❖ Display Contrast
You can adjust the contrast of the display in seven increments, Lighter to
Darker.
NeptuneC1_GBzen_F_FM_pre.book Page 40 Tuesday, December 16, 2003 5:03 PM
To Next Page
Loading...
