Paper and Other Media
16
1
B Lift the front side of the tray, and
then pull it out of the printer.
C If you load paper larger than
A4K or 8
1
/
2
× 11K, you should ex-
tend the tray as follows:
Note
❒ You cannot load paper smaller
than A4K or 8
1
/
2
× 11K, if the
tray is extended. In this case, re-
turn the tray to its standard
length.
D Slide the catches inwards to un-
lock the tray.
E Slide the tray until it stops.
F Return the catches to their origi-
nal positions.
Important
❒ Confirm that the catches return
to their original positions se-
curely. If they are not locked se-
curely, paper misfeeds might
occur.
G Adjust the rear and side guides to
the paper size you want to load.
ZKGY140E
ZKGY160E
ZKGY170E
ZKGY180E
ZKGY120E
KirP4GB_Mainte-F5_FM_forPaper.book Page 16 Wednesday, December 8, 2004 6:13 PM
To Next Page
Loading...
