Making Printer Settings Using the Control Panel
145
❒ Default: 30 minutes
❒ When the printer switches to the Energy Saver mode, the Power indica-
tor goes off, while the On Line indicator stays lit and [Energy Save Mode]
appears.
❖ Auto Reset Time
You can set On or Off and the time for the Auto Reset Timer.
❒ Appear only at network standard model.
❖ Auto Reset
•On
•Off
❒ Default: On
❖ Set Time
• 10 to 999sec by 1sec.
❒ Default: 60 sec
❖ Memory Usage
You can select memory to be used from “Font Priority” or “Frame Priority” ac-
cording to the paper size, resolution or printer language.
•Font Priority
This setting uses memory for registering fonts.
• Frame Priority
This seting uses memory for high speed printing.
❒ Default: Frame Priority
❖ Unit of Measure
You can specify the unit of measurement in “mm” or “inch” for the custom pa-
per size.
•mm
•inch
❒ Default value is destination dependant.
To Next Page
Loading...
